The Telecab17 is a two-stop elevator that travels through a simple floor cut-out for a vanishing elevator effect, leaving you more usable space. Available in two standard sizes – both with a capacity of 845 lb – the lift can typically handle multiple passengers as well as heavier mobility equipment.
With a modular, fully enclosed drive tower which attaches to a support wall, no hoistway is required – so no need to worry about complex, costly installations.
If you are looking for a space-saving, stylish and affordable mobility solution for your home, the Savaria Telecab17 is the answer for you.
Innovative and space-saving design: “Vanishing” elevator, sleek modern styling with transparent panels to blend with your home décor
No hoistway or pit required: Fully enclosed drive tower designed for safety and aesthetics.
Ultra-high capacity: 845 lb.
Standard finish options: Rust-resistant powder-coated aluminum frame (white) with clear acrylic window panels.
Other standard features: Constant pressure controls for operation with keyless or keyed access on car and call stations, cab top sensor stops the unit from moving when pressure is detected, left or right hand opening door; hydraulic door closer.
Safety features: Interior lighting, emergency stop and alarm buttons, battery lowering in case of power failure as well as manual emergency lowering, telephone, nonskid platform, underpan sensor to stop the unit if it meets an obstruction, pressure relief valve to prevent platform overload, door interlock, and slack chain safety device.
Warranty: 36 months parts, ask for details
W30" x L46" x H80" (762 mm x 1168 mm x 2032 mm)
W36" x L54" x H80" (914 mm x 1372 mm x 2032 mm)
Other options: Optional battery power for up to 5 trips up and down, in case of power failure
Applications: Residential, indoor
Capacity: 845 lb (384 kg)
Maximum travel distance: 23' (7 m) with 2 stops
Speed: 20 ft/min (0.1 m/s)
Floor cutout: 60.5" x 35.25" (1537 mm x 895 mm) for 30" x 46" cab, 68.5" x 41.25" (1740 mm x 1048 mm) for 36" x 54" cab
Minimum overhead required: 96" (2438 mm) to have 6" minimum clearance by code, 92" (2337 mm) where code permits
Drive: 2:1 roller chain hydraulic
Motor/pump: 24 VDC, 3 hp (2.1 kW), gear type hydraulic pump